Ana-Digit Ltd AD-RC Smoke Generator for RC Body ADRC Smoke+

Artikelnummer: AT-AD/AD-SMOKE+

GTIN: 615345324362

Sofort Verfügbar !
Hinweis zur Verfügbarkeit: Online und im Ladenlokal sofort verfügbar
Versandfertig in: 0 - 1 Werktage*** (DE)

79,99 €

inkl. 19% USt. , zzgl.

Ana_Digit

Ana-Digit Ltd AD-RC Smoke Generator for RC Body ADRC Smoke+

Stk

Beschreibung
Bewertungen

AD-RCSmoke+ is an upgrade version.

It supports:

Programmable brake mode to stop smoke when braking;
Simulate engine start smoke effect for sound module.
Throttle quick change between neutral and forward to generate smoke.
Suitable for RC model vehicle / ship / tank / train
Fully automatic calibration and remote operated via 1/2/3 channels
4 selectable smoke generation rates for various usages
2 wired LEDs for flame simulation and status indication
5V~6V BEC and an external battery operated
Selectable external battery voltage 7.2V or 12V
The smoke chamber is in all-in-one construction
Built-in overheat protection
Environmental friendly smoke oil
Plenty of smoke can last for 6 (max. smoke) to 15 minutes (min. smoke) with a refill
Perfectly match with AD-RC03 to emit smoke using a 4-channel transmitter

FUNCTIONS

Channel 1, Steering (Optional)
- 2nd priority to determine smoke on or off
- Turn on / off smoke if CH3 sets to smoke following throttle and throttle is at neutral
Channel 2, Throttle (Compulsory)
- Follow proportional throttle to emit smoke if CH3 sets to smoke following throttle
Channel 3 (Optional)
- Highest priority to determine smoke on, off and following throttle
Smoke Generation Rate
- 4 rates are selectable by 2 on-board jumpers
Flame Simulation
- 2 flame simulation patterns i.e. follow throttle and random, are selectable by an on-board jumper
Status Indication
- Show operating status via 2 wired LEDs
Overheat Protection
- Automatically stop the heater if overheat occurs. Then resume to normal after 1 min
Smoke Outlet
- 2 silicon tubes can be used to guide the smoke path

Package Include:

Main unit
Smoke Chamber
Servo Cable
7mm Outlet Cap x 2
7mm Silicon tube x 2
LED Wire Assembly (1 Wire with 2 LED)
User Manual

Dimensions:

Smoke Unit: length 38.5mm width 30mm height 41mm
Control Unit: length 65mm width 30mm Height 11mm

Es gibt noch keine Bewertungen.

Stk