Boom Racing Complete Rear Assembled BRX90 Portal PHAT™ Axle

Artikelnummer: AT-BRPT9023

GTIN: 0651281454176

Sofort Verfügbar !

Lagerort: Online und im Ladenlokal sofort verfügbar
Versandfertig in: 0 - 1 Werktage*** (DE)

139,99 €

inkl. 19% USt. , zzgl.

Boom Racing

Stk

Achtung:
Für Kinder unter 3 jahren nicht geeignet. Erstickungsgefahr!

Dieses Modell ist kein Spielzeug! Empfohlen für Modellsportler ab 14 Jahren.

Benutzung nur unter unmittelbarer Aufsicht von Erwachsenen.

Beschreibung
Bewertungen

This is a complete set of rear assembled BRX90 portal PHAT™ axle set.

This is a heavy-duty axle set designed for performance-based scale RC builds. Designed for both linked and leaf spring setups. Use this axle as a base for any custom builds.

Packed with many desirable features; a heavy-weighted cast alloy axle housing for low CG, reversible axle bevel gear positions, leaf spring over and under axle (optional), detachable aluminum CNC truss, adjustable caster angle, and more.

It uses top-quality drivetrain components that are heavy-duty and efficient, including a set of hardened steel triangular keyed AR44 axle gears (30/8T) and a pair of BADASS™ steel rear drive shafts for ultimate strength and durability.

The portal gearbox is designed with four heavy-duty hardened steel gears each for strength and durability.

Includes black color XT diff cover and black color third member unit (fits Reverse AR44 Helical Cut Bevel Gear for running Counter Rotating Center Drive Shafts usually used in the rear axle).

Specification:
Width: 188.3mm / 7.41" pin-to-pin (BRX90 portal axle front and rear axles are the same width)
Requires 44mm / 1.73" wheel barrel clearance (to clear the entire portal gearbox)
Portal gearbox ratio: 1:1
Weight: 261.5g
Portal Gearbox Size:
Width: 23.5mm
Height: 30.5mm (21.5mm above shaft / 9mm below)

Features:
Additional 15mm / 0.59" ground clearance at the pumpkin over BRX90 straight axle
CNC aluminum portal lockout and cover
BADASS™ heavy-duty steel rear driveshafts and portal driveshafts for ultimate durability and strength for the axle drivetrain
Four heavy-duty hardened steel metal gears in each portal gearbox
Narrow axle setup for super scale builds and smaller 1/10 bodies
Cast PHAT™ axle housing - strong, durable, and heavy which keeps the CG low
Anti-twist steel brackets to prevent axle twist
Reversible axle gear in the housing (swap gear to the opposite side for counter rotation center drivetrain setup)
Standard AR44 high pinion gear & input shaft for better clearance
Leaf spring over and under the axle housing option
CNC aluminum truss included for linked setup (remove truss for leaf spring option for ultimate scale look)
Removable third member for 6x6 / 8x8 pass-thru option
Third member high pinion angle for higher clearance
Full rubber sealed bearings
Full 12.9-grade hardware

Includes:
2x CNC Aluminum Portal Lockout #BRPT9023B
2x CNC Aluminum Portal Cover #BRPT003
2x BADASS Portal Rear Driveshaft #BRPT9023A
2x BADASS Portal Shaft Spindle #BRPT007
4x Hardened Steel Gear 20T
4x Hardened Steel Gear 16T
2x Anti-Twist (0 Deg) Steel Bracket (Left & Right) #BRPT004
1x Cast Alloy PHAT Axle Housing #BRLC7024
1x Cast Alloy XT Pumpkin Diff Cover #BRLC7088
1x AR44 30/8T Triangular Keyed Hardened Steel Gear Set (Ring/Pinion Gear + Spool) #BR955020
1x CNC Aluminum Truss #BRLC7004
2x CNC Aluminum Link Mount #BRLC7005
1x M3 Nyloc #BRASNUTM3
22x Full Rubber Ball Bearings
4x Washer
5x Spacer D5X8X0.1 #BRASSPD5801
2x E-Clip #BRASEC30
Full 12.9 Grade Screws